308302 Multi-Code by Linear Two Button Key Chain Remote

The New Multi-Code by Linear 308302 remote will work with Stanley garage door openers that use 10 on/off dip switches. This remote uses two sets of 10-position on/off coding switches to set the remotes code. Codes are set by matching the switches to a working remote or to the switches on the back of the garage door opener's receiver.

We process orders on the next business day and offer a 30-day return policy for your convenience.

The two-button remote also works the door open/close feature on digital door openers.

Stanley Directions For 9 or 10-Position “Switch” Receivers and Remotes

Match the position of each transmitter switch to the corresponding powerhead switch location.

Repeat for each remote button using different code for the 2nd button.

Example:

If switch #3 is toward the open/off position on the powerhead, its counterpart in the transmitter should also be in the open/off position.

If #4 is in the closed/on position, the transmitter switch #4 should also be set to the closed/on position, etc.

If your powerhead has only nine switches, then place the transmitter’s tenth switch in the open/off position.