The 2ANHJGDR33 One Button Remote Control can control one door opener that uses a 9 or 10 switch code on the opener's powerhead unit attached to the ceiling in the garage. This remote works with Stanley 310MHz garage door openers made with digital switches.
This remote includes a key ring, an installed battery, and programming instructions.
We process orders on the next business day and provide a 30-day return policy for your convenience.
Directions for 9 or 10-Position “Switch” Opener Remote Controls
Match the position of each transmitter switch to the corresponding powerhead switch location.
Example:
If switch #3 is toward the open/off position on the powerhead, its counterpart in the transmitter should also be in the open/off position.
If #4 is in the closed/on position, the transmitter switch #4 should also be set to the closed/on position, etc.
If your powerhead has only nine switches, then place the transmitter’s tenth switch in the open/off position.
Directions For Clip Wire Opener Remote Controls
Determine which wires if any have been clipped on your opener. When a coding wire is cut, the corresponding transmitter switch should be moved to the open/off position for proper coding. With no code wires cut on the opener, all even numbered transmitter switches should be pushed to the closed/on position and all odd numbered transmitter switches pushed to the open/off position.