The new GD-R21 compatible wireless keypad works with openers using purple learn buttons to program the keypad code. This keypad will open or close your garage door without using a remote control or key. This keypad opens the door using a private 4-digit code you program directly into the unit. This order includes a compatible wireless keypad, mounting screws, battery and programming instructions.

Ships the Next Business Day.

Compatible Keypad Programming Instructions:

Locate the PURPLE Learn button on your garage door opener power head (it will be a square PURPLE button on the end of the motor unit where the antenna wire is located.) You may have to remove the light lens cover on some models.

1. Press and release the PURPLE learn button on the motor unit of your garage door opener. A yellow light will light up next to the learn button.
2. Using the keypad within 30 seconds enter a 4-digit number of your choice and press and hold down on the ENTER key.
3. Release the Enter key when the garage door opener motor unit lights blink. If bulbs are not installed, you should hear 2 clicks after 4 seconds.
4. Enter your 4-digit code to test the keypad. You are now done.