The new GD-R26 wireless keypad is designed to work with garage door openers that use RED or ORANGE learn buttons for keypad code programming. This convenient keypad allows you to open or close your garage door without the need for a remote control or key. Simply enter your private 4-digit code, programmed directly into the device, to operate your door.

Included with your order is a compatible wireless keypad, mounting screws, a battery, and programming instructions.

We process orders on the next business day and provide a 30-day return policy for added convenience.

1. Locate the ORANGE Learn button on your garage door opener power head (it will be a square ORANGE button on the end of the motor unit where the antenna wire is located.) You may have to remove the light lens cover on some models.
2. Press and release the ORANGE learn button on the motor unit of your garage door opener. A yellow light will light up next to the learn button.
3. Using the keypad within 30 seconds enter a 4-digit number of your choice and press and hold down on the ENTER key.
4. Release the Enter key when the garage door opener motor unit lights blink. If bulbs are not installed, you should hear 2 clicks after 4 seconds.
5. Enter your 4-digit code to test the keypad. You are now done.